If you are looking for a RO water purifier repair, then you must know what kind of repair your unit requires. The most common repairs for RO units are associated with issues in the RO membrane. There are two types of RO membrane: polypropylene (PP) and mixed-bed ion exchange (MIX). The type of membrane will determine the type of repair needed. For more information on RO repair services, you can always contact our team at Ram Services and Sales, and we will be available to resolve your repair concerns. For general information on RO repair services, continue reading this blog.
The most common repairs for RO units are associated with issues in the RO membrane.
The most common repairs for RO units are associated with issues in the RO membrane. This is because it’s a crucial part of the system, separating clean water from dirty water. The membrane is made from a special material that allows only pure water to pass through it, while filtering out impurities like bacteria and other harmful contaminants.
If your unit starts leaking or becomes damaged in any way, this could mean that there’s something wrong with its membrane–and if you don’t repair it right away, you might end up spending more money on repairs later on down the line!
A leaking membrane
A leaking membrane is one of the most common repairs for an RO water purifier. A leaking membrane can cause your unit to leak, or it may simply make the unit work less efficiently.
When you purchase an RO system, the most important part of its lifespan is going to be how well you take care of your membranes. Membranes are made from thin plastic and can become damaged if they are mishandled or dropped while being installed or transported. If this happens, there’s a chance that water will leak out of your unit and into whatever container it was in at the time (or even onto your countertop).
Fortunately, fixing this problem isn’t too difficult! Membranes are replaceable parts that can easily be swapped out once they’ve been damaged beyond repair by improper handling–and they’re not expensive either!
Water pressure of your unit and its water flow rate
Water pressure and flow rate are two key factors in determining how well your RO unit is working. The water pressure refers to the force that pushes water through the membrane, while flow rate refers to how much of it passes through in a given period of time. If you notice that your water doesn’t taste as crisp as usual, it’s likely due to low water pressure–and even worse if there’s no change at all when you increase or decrease levels in your home’s faucets!
If this sounds familiar, don’t worry: we’ve got some tips on how best to troubleshoot RO purifier issues yourself before calling out an expert technician (and getting charged extra fees).
Problem with your membrane
If you are experiencing a problem with your membrane, don’t worry! It’s very common for water filters to experience some issues after extended use. In fact, most RO systems will eventually need repairs at some point in their lives. If this is the case for your system and you have noticed that there is something wrong with it, then it could be time for some maintenance.
When repairing an R/O system we recommend replacing all parts as needed because even if one part fails another may be on its way out soon too!
Leaks in its distribution system
If you have an RO water purifier, it’s important to know that there are several parts of the unit that can leak. The distribution system is one of these parts and it connects your membrane (which filters out contaminants) with your faucet. Water leaks from this area when there is improper installation or age-related wear on valves, filters and tubing within the distribution system.
The best way to fix leaks in an RO unit’s distribution system is simply by replacing it entirely–you don’t want any further damage caused by trying to repair something yourself!
Filters or valve leaks
If your water purifier has a filter or valve leak, there are a few ways to detect it.
- Check the filter for signs of damage and replace it if necessary. If this doesn’t solve the problem, move on to step two.
- Check for leaks around valves (the part that connects pipes) by turning off all faucets in your house and checking all drains for water. If you find a leaky valve, replace it with one from an approved supplier like Ram Services & Sales.
If none of these steps solves your problem or if you can’t get replacement parts easily because they’re hard to find where you live, call Ram Services & Sales immediately at 9284004267 / 9960010998. We’ll send someone out right away so they can assess what’s going on and give advice on how best to proceed with repairs–or maybe even offer some other options (like buying another RO system).
Ram Services & Sales provides quality RO repair service in Nagpur
Ram Services & Sales provides quality RO repair service in Nagpur. Our team of experts is highly skilled and trained to provide you with the best services. Our services include repairing all major brands of water purifiers from Blue Star, Kent, Prestige and many more.
Our technicians are experienced enough to handle any kind of problem related to your RO system whether it is leakage or any other technical fault. We make sure that you get your systems back on track within no time so that you don’t have to face any further problems regarding their drinking water needs at home or office premises after we’ve repaired them for you!
We hope that you found this article helpful in understanding the different types of RO water purifier repairs and the associated issues. If you need any help with your water purifier, please feel free to contact us at Ram Services & Sales beside Ram Coolers today!
Also Read: How to Improve the Cooling Efficiency of Your AC – Ram Services and Sales